Because a quick shift in temperature can break the glass, the plate should never be removed by pouring hot water over it.
Now that the first pre-winter frosts have arrived in Spain, it's good to learn a few basic ways to remove the ice that forms on your windshield first thing in the morning. Simple guidelines to avoid wasting time and harming the windshield while removing plaque from the glass.
Before the cold set in
It's critical to keep your windshield and blades in good shape during this time of year, when fog, rain, and extreme cold (and snowfall) are typical. If these don't clean effectively, they leave spots on the glass that is difficult to see, posing a risk to circulation. Replace them at least once a year.
Homemade solutions for windshield washer fluid aren't worth it. The tank must be filled with an antifreeze-containing chemical; otherwise, the water or soapy water would freeze, and this could cause the hoses to freeze and the sprayers to clog.
Ice should be avoided at all costs.
When a car sleeps on the street, the risk of ice developing on the glass increases, some homemade remedies, such as wiping the glass with a peeled potato or spraying it with a water-vinegar mix, may be effective. However, the most effective method is covering the window with cardboard or, better still, a blanket and trapping it with the front doors and the brushes themselves. The windshield wipers stick to the glass, which is one of the perils of ice.
Remove the ice.
This scene is not unusual in the morning: automobiles parked with the engine running and the windows covered in ice, the driver waiting for the heater to melt the ice. Or, much worse, automobiles are circling with little visibility. There are numerous options to address the problem more quickly, but it does not propose blowing scorching air or putting boiling water on the glass. A quick shift in temperature, especially if the windshield is shattered, could cause it to break.
Following these suggestions, on the other hand, will be an excellent idea:
Even if it's chilly outside, start the car, switch on the heater, and blow the air to the windshield. The air will gradually warm up, avoiding an abrupt temperature change.
Make use of a de-icer. The solution is more costly, but it works.
There are a lot of them on the market. Rubbing alcohol should be sprayed on the windshield. This is a suitable option because alcohol freezes at a considerably lower temperature than water, but it only works if the ice coating is thin. Alcohol, on the other hand, should not be used in the windshield washer reservoir.
Scratch the ice with your finger. If the layer is thick, you'll have no choice but to scrape it off using a plastic scraper, or, if that fails, a credit card or something similar, or a CD case. It would help if you never used a metal instrument on the glass since it could scratch it.
Wipe the windshield using the wiper. Use the brushes to finish the cleaning once the ice has been removed and the meetings have been disconnected, as long as the liquid contains an antifreeze product.
What you shouldn't do!
As previously said, you should never use boiling water or air, and you should also avoid using the windshield wiper because the blades will most likely become stuck. They may fail, and the system's engine will suffer the same fate. Salt is inefficient (it stops freezing but does not defrost) and scratches the glass and corrodes the sheet, so it is not a good remedy.
We are Car Buyer is a reliable name for Best Car Buyers in London
